|
|
Post by gemini on Sept 1, 2008 19:16:38 GMT -5
Anyone know for sure if this is okay width wise for our cars ? and is 300 hun okay price wise ?
|
|
|
|
Post by gemini on Sept 3, 2008 18:04:12 GMT -5
It's the same width, using a tape measure and both on the ground. 48"Excellent looking rear !
|
|
|
|
Post by w2zero on Sept 3, 2008 19:38:50 GMT -5
Yup, that's one that is a bolt in. The caliper mounts can crack is the only problem other than the gears tend to be on the freeway flyer type.
|
|
|
|
Post by gemini on Sept 4, 2008 23:00:07 GMT -5
Calipers look good, soaking it in penetrating oil U bolt nuts came off easily ! it's got 2.50 gears with a locker ! He said the car was a 6 cyl auto. Hey zero are you saying I don't hafta move the leaf spring perches ?
|
|
|
|
Post by w2zero on Sept 21, 2008 0:09:45 GMT -5
Last I heard, that one is a real bolt in unit. Yes, 300 is an excellent deal on it. You'll be lookin to pull it apart and see if the clutches are all okay and reassemble with some different gears maybe. Check the bearings to begin with since it is not uncommon for them to all be in fine shape and not needing replacement for thirty or forty years.
|
|
|
|
Post by roy on Nov 12, 2008 11:03:56 GMT -5
Yep, its a bolt in
Make sure you got all the emergency brake aprts to hook up brake, you can;t buy those little levers anywhere, last time i checked anyway
And, when i bought rotors, if i remember right they were hella expensive! prone to cracking
|
|
