|
Post by ca on Feb 13, 2009 16:27:34 GMT -5
thats about the price they seem to be goin for used, IF you can find one.
|
|
|
Post by STU on Jun 29, 2009 8:32:09 GMT -5
A little update, I haven't had much time for the car with our three little monsters taking up all my time but I did manage to get the 5spd mounted in the car and the crossmember is bolted up. I just used some 2" x 3" tubing to extend the wings for the trans crossmember to mount to, they are just bolted in to the original crossmember studs. So the 5spd is bolted in, the under side of the dash is apart as I prepare to install the clutch pedal and cable. I have decided to hang on before I build the engine. I have a lot of aftermarket parts for the engine so I'm toying with the idea of buying a balanced rotating assembly with H-beam rods and forged slugs to make it a stout 500HP 5L....The only thing stock will be the block if it all goes as planned.
|
|