|
Post by ca on Mar 25, 2016 15:06:38 GMT -5
Okay, I bothered to crawl under my '62 and take a better look. Those are the supports for the trans mount. Like I said before, it's best to lay them up against any part from another model/year. Real neasy to swap out IF you support the rear of the trans= be sure to use a block of wood between the trans case and whatever you use to raise or support the trans, and probly best to get close to the middle of the trans rather than the end/seal area.
|
|
|
Post by ssmc12 on Mar 25, 2016 15:17:55 GMT -5
I found out what they are called...it's an engine rear mount support bracket..was even able to get a part number and order it
|
|
|
Post by ca on Mar 25, 2016 17:22:23 GMT -5
Very good!
|
|
|
Post by ssmc12 on Mar 25, 2016 17:25:41 GMT -5
And I just got it tonight
|
|