|
Post by allshow on Sept 19, 2008 21:59:41 GMT -5
I posted pictures in the picture only. Under progress. tried to post them in here and could not figure it out
|
|
|
Post by ca on Sept 19, 2008 23:00:35 GMT -5
|
|
|
Post by allshow on Sept 23, 2008 23:18:22 GMT -5
my wife posted them hence why i cant figure it out.
|
|
|
Post by inzane240 on Jun 19, 2009 11:21:17 GMT -5
I used this thread to do the front of my meteor. I used slam specialties bags to avoid the clearence issues that you were having. Thanks for taking the time to detail your installation Heres a pic:
|
|
|
Post by eliotsdad on Jun 19, 2009 11:28:07 GMT -5
That is SWEET!
So many lowered cars seem to have goofy camber on the wheels, but this looks perfect.
|
|
|
Post by w2zero on Jun 19, 2009 15:37:39 GMT -5
Indeed it do. These cars have a lot of adjustability in that upper inner control arm shaft. Lots more to lowering than just having the appearance of being filled with concrete and handling likt it too. My old 69 Datsun convertible pickup was lowered 6.5" in front and 8.5" in the rear and I had 205x60x15 tires in front with 245x60x15's in the rear on 8" rims all round. With suspension travel and no goofy camber issues either. A little backyard engineering pays back a bunch.
|
|
|
Post by STU on Jun 21, 2009 7:09:58 GMT -5
That looks wicked indeed.....Now I gotta do that to mine...LOL.....I'mthinking of buying new wheels to go with my blown 5.0/5spd swap.
|
|
|
Post by w2zero on Jun 21, 2009 15:54:07 GMT -5
One of my neighbors has a newer factory Cobra. Amazing sounding engine noises
|
|
|
Post by allshow on Jul 4, 2009 8:54:18 GMT -5
HERE IS WHAT I THINK THE FINAL STANCE IS GONNA BE AFTER BAGGING THE METEOR
|
|
|
Post by w2zero on Jul 4, 2009 11:27:27 GMT -5
definitely in the weeds, like it!
|
|
|
Post by inzane240 on Jul 21, 2009 14:16:51 GMT -5
allshow, did you static drop the rear or did you put in a linked system?
|
|
|
Post by allshow on Jul 22, 2009 16:52:16 GMT -5
linked it. two link set up. You? I am all the way down as far as i can go without cutting frame and driveshaft tunnel... Its not low enough for me but i guess will have to do.
|
|
|
Post by allshow on Jul 22, 2009 16:54:02 GMT -5
look in the picture section under PROGRESS thats our car.
|
|
|
Post by allshow on Oct 2, 2009 13:16:10 GMT -5
inzane u still out there
|
|
|
Post by inzane240 on Nov 11, 2009 14:13:33 GMT -5
Hey I'm here. Mines static dropped with Air over Leaf. But I'm looking into a 3 link...
|
|