|
Post by ca on Jun 28, 2007 14:49:05 GMT -5
DONT BE POSTIN CRAP LIKE THAT HERE================== =========================================== =========================================== =========================================== ==================================aint a SBF manifold
|
|
|
Post by eflow on Jun 28, 2007 14:51:43 GMT -5
They didn't have the FoMo set up on da website! Not my fault Summit is so narrow minded... Did you have your bran this morning or are you just that constipated all the time!
|
|
|
Post by ca on Jun 28, 2007 14:57:36 GMT -5
just messin with ya
|
|
|
Post by ca on Jun 28, 2007 15:00:07 GMT -5
Port Matching vs. Gasket Matching - Port matching is not the same as gasket matching. Port matching is lining up the ports on an engine so there is no abrupt wall change when going from the intake runners to the cylinder head ports. Gasket matching accomplishes the same thing but the ports will be opened up to the gasket size. Okay so what's the big deal? If you gasket match the port may go from small to big and back to small because it was opened up too big at the gasket surface. The bottom line is you might lose a little power by doing a gasket match instead of a good port match.
|
|
|
Post by Meteorgirl on Jun 28, 2007 15:33:01 GMT -5
Somewhere on these boards is a picture of a proper SBF pollished tunnel ram with 2 600 Holleys on hubbys little brothers 1973 Mazda 808 coupe that has an awesome 289 in it.
|
|
|
Post by Joeyman on Jun 28, 2007 16:18:25 GMT -5
Dont tell me your going to cut a big hole out of your hood for that tunnel ram
|
|
|
Post by eflow on Jun 28, 2007 16:43:04 GMT -5
Aaa...who needs a hood...My ol' '62 has such a hot date with a Sawzall it aint funny.
|
|
|
Post by ca on Jun 28, 2007 17:02:11 GMT -5
he's goin for the A/FX look Joeyman, as in REAl A/FX look
|
|
|
Post by ca on Jun 28, 2007 17:08:33 GMT -5
we'll talk him into FI and stacks later ;D
|
|
|
Post by w2zero on Jun 28, 2007 20:29:27 GMT -5
The intake gaskets with the screens in them are good for making tunnel rams more streetable.
|
|
|
Post by eflow on Jun 29, 2007 18:05:29 GMT -5
WHOA, really? Tell me more. I haven't heard of that.
|
|
|
Post by w2zero on Jun 29, 2007 21:22:25 GMT -5
|
|