|
Post by ca on Jun 26, 2007 21:16:52 GMT -5
w2, Stu and anybody else cept Joeyman, what kind of intakes you guys runnin? any opinions on others - good or bad?
|
|
|
Post by Meteorgirl on Jun 26, 2007 21:41:52 GMT -5
Performance Products 54001 Typhoon. 1500-6500 RPM advertised. Just ordered a 54000 which is exactly the same but polished. They are considerably less than an Edelbrock performer and I'm quite pleased. No problem with hood clearance even with 3 inch filter element.
|
|
|
Post by Meteorgirl on Jun 26, 2007 22:07:21 GMT -5
The older Edelbrock F4B apparently worked well on the older 221, 260 & 289's. Hubby thinks they start just off idle.
|
|
|
Post by ca on Jun 26, 2007 23:00:53 GMT -5
i'm askin about 5.0 info- guess i shoulda said that
|
|
|
Post by w2zero on Jun 27, 2007 0:13:28 GMT -5
The Weiand Stealth is highly recommended. The Edelwhacker RPM is okay. The Ed performer is good to 5500.
|
|
|
Post by STU on Jun 27, 2007 4:27:33 GMT -5
I have a Wieand action plus, nice working intake but when I put the TF stg-1 cam in I'm getting a stealth. I have one on my 357W, sweet intake.
|
|
|
Post by johnc118 on Jun 27, 2007 7:22:24 GMT -5
Edlebrock Torker II, Heck of a lot better than the stock castiron 2 or 4 bbl. plus since most of my driving will be above 1500 rpm. running a center pivot float bowl Holley if I can get the d**n thing to work right.
|
|
|
Post by Joeyman on Jun 27, 2007 8:28:34 GMT -5
Well I wasn't going to tell you anyway CA..............it's a secret
|
|
|
Post by arie on Jun 27, 2007 14:44:12 GMT -5
Edelbrock performer with a 1404 edelbrock carb. Nice for cruising waved at the hot rod that was pulled over by the cops as I went by today. Think he had a bad day (chevy)
|
|
|
Post by STU on Jun 27, 2007 19:25:51 GMT -5
I forgot, I'm running a 600 Holley and red electric pump.
|
|
|
Post by eflow on Jun 27, 2007 21:19:52 GMT -5
Edelbrock RPM Airgap with a Holly 600 cfm carb. Got a super good rating in dyno tests from both "Mustangs and Fords" and "Hot Rod" magazines.
|
|
|
Post by minimandan1 on Jun 28, 2007 14:02:44 GMT -5
edelbrock performer with Weber/carter/edelbrock carb.....not sure what CFM but it works well (same as Arie's setup?) .......heard real good things abou the RPM Airgap.
|
|
|
Post by Joeyman on Jun 28, 2007 14:09:53 GMT -5
Did anyone gasket match... ?
|
|
|
Post by ca on Jun 28, 2007 14:43:03 GMT -5
everyone here gasket matches
|
|
|
Post by eflow on Jun 28, 2007 14:46:20 GMT -5
This set-up is next.
|
|