|
Post by STU on Feb 7, 2004 15:48:42 GMT -5
Has anyone found a stock Ford electric cooling fan that fits the 62-63 radiators? I want to pick up a few free HP but I also want to know what vehicles that I should look at for a cheap electric fan.
|
|
|
Post by w2zero on Feb 7, 2004 17:25:34 GMT -5
Stu How much clearance do you have between the water pump pully and the radiator? I happened on a pair of Scirocco fans with a pile of other parts at a garage sale so that's what I used.
|
|
|
Post by STU on Feb 7, 2004 18:16:26 GMT -5
Quite a bit but I will have measure. How does it fit the rad? My rad is like 20x20 or so, not 17x20 like most.
|
|
|
Post by ca on Feb 8, 2004 0:48:22 GMT -5
i've got a 17" 2 speed from an early 90's taures wagon that i am going to attempt tomorrow it looks like it could without toooo much modification but we'll see
|
|
|
Post by STU on Feb 8, 2004 19:12:24 GMT -5
Let me know if it works and I will try to find one for myself.
|
|
|
Post by w2zero on Feb 27, 2004 17:20:53 GMT -5
My radiator is the 17x20 since it is the original config. I did have Performance Radiator make it into a three row though. The water pump snout fits in between the Scirocco fan motors so there is plenty of clearance. My front dress depended on the front cover I had so the length of the snout is same as mid seventies and up truck. So far there hasn't been any overheating problems and that is through at least three years of daily driving and sitting in traffic in 90+ heat.
|
|