|
Post by ca on Apr 11, 2008 13:44:47 GMT -5
49 isn't too narrow. you already have a problem with rubbin when you turn corners,right?
|
|
|
Post by Joeyman on Apr 11, 2008 13:59:23 GMT -5
Yeah but not really so much on the outer most part. How about the inside's........won't that put the inside of the tire closer to the inner wheel well. There are more rub marks on the inner part of the tire than the outer most part of the tire.
Look at the pics again look at the tire closely you can see the rub marks on the inside. I have no idea where it's rubbin but it is. Wierd thing is nothing is near it on the inside. Only thing i can think of is when i do a burnout the tire blows up big like a balloon. I don't know
|
|
|
Post by Joeyman on Apr 11, 2008 14:02:16 GMT -5
here look see the dark line going around the tire about an 1inch wide. That's a rub mark. i think you can even see my pinion snubber in that pic
|
|
|
Post by ca on Apr 11, 2008 14:05:01 GMT -5
doesn't blow up like a balloon but gits taller. i'll crawl back under mine again n see what it might be
|
|
|
Post by Joeyman on Apr 11, 2008 14:06:38 GMT -5
there's a mile of space on the insides from my tire to the wheel well. I have no idea what it can be rubbing up against. My car sits up higher in the back. I don't know. But i need that problem to go away. Last thing i want happen is my tire to blow out as I'm doing over 100mph down the track
|
|
|
Post by Joeyman on Apr 11, 2008 14:15:38 GMT -5
i'm going to take some measurement today after work. I just have to drive over to where the car is parked. I will take more pictures of the wheel wells and stuff. Post my findings here.
you'll have to wait till monday though.
|
|
|
Post by Joeyman on Apr 11, 2008 14:21:42 GMT -5
what 's this guy thinking
ebay # 330226569036
FORD 8" EIGHT INCH REAR TRAC-LOC POSI SAFE TO 550hp
|
|
|
Post by ca on Apr 11, 2008 15:01:04 GMT -5
8" probly would handle the HP dependin on suspension.
what may be rubbin on yours is the forward lower section of the wheelwell. thats the closest place on mine. i only have about 2 inches maybe a lil less with stock tire n wheels. could make a lot more room in there with a body saw and maybe a lil weldin
|
|
|
Post by ca on Apr 11, 2008 15:03:02 GMT -5
with leaf springs there is a lot of side to side movement that we really don't think about anther reason LEAFS SUCK
|
|
|
Post by ca on Apr 11, 2008 15:07:20 GMT -5
|
|
|
Post by ca on Apr 11, 2008 15:09:11 GMT -5
i'm off to DMV and i really dread the 2 hour wait so............
|
|
|
Post by STU on Apr 11, 2008 18:51:20 GMT -5
New axles from Curries are cheap, like $300-400 out the door for 31 spline.
|
|
|
Post by Joeyman on Apr 14, 2008 10:12:59 GMT -5
Well I made it over to where the car sits. I crawled under there with a tape measure and I came up with 52.5 same as you guys. But I feel it wasn't an accurate measurement due to the fact that the tape was pushed out because of the third memeber.
My batteries were dead in my camera so I could take any pics. I wanted too. but.....
|
|